Template‐Based Reconstruction of Surface Mesh Animation from Point Cloud Animation

In this paper, we present a method for reconstructing a surface mesh animation sequence from point cloud animation data. We mainly focus on the articulated body of a subject — the motion of which can be roughly described by its internal skeletal structure. The point cloud data is assumed to be captured independently without any inter‐frame correspondence information. Using a template model that resembles the given subject, our basic idea for reconstructing the mesh animation is to deform the template model to fit to the point cloud (on a frame‐by‐frame basis) while maintaining inter‐frame coherence. We first estimate the skeletal motion from the point cloud data. After applying the skeletal motion to the template surface, we refine it to fit to the point cloud data. We demonstrate the viability of the method by applying it to reconstruct a fast dancing motion     

Angle estimation error reduction method using weighted IMM and least squares

International Journal of Control, Automation and Systems - This paper proposes a new approach to reduce target estimation error, especially the measurement angle, when applied to medium- and...     

Stall inception and warning in a single-stage transonic axial compressor with axial skewed slot casing treatment

Characteristic changes in the stall inception in a single-stage transonic axial compressor with an axial skewed slot casing treatment were investigated experimentally. A rotating stall occurred intermittently in a compressor with an axial skewed slot, whereas spike-type rotating stalls occurred in the case of smooth casing. The axial skewed slot suppressed stall cell growth and increased the operating range. A mild surge, the frequency of which is the Helmholtz frequency of the compressor system, occurred with the rotating stall. The irregularity in the pressure signals at the slot bottom increased decreasing flow rate. An autocorrelation-based stall warning method was applied to the measured pressure signals. Results estimate and warn against the stall margin in a compressor with an axial skewed slot.     

Carbohydrate Analogue Microarrays for Identification of Lectin‐Selective Ligands

Fifty‐five mono‐ and disaccharide analogues were prepared and used for the construction of microarrays to uncover lectin‐selective ligands. The microarray study showed that two disaccharide analogues, 28′ and 44′ , selectively bind to Solanum tuberosum lectin (STL) and wheat germ agglutinin (WGA), respectively. Cell studies indicated that 28′ and 44′ selectively block the binding of STL and WGA to mammalian cells, unlike the natural ligand LacNAc, which suppresses binding of both STL and WGA to cells.     

Fabrication of Superjunction Trench Gate Power MOSFETs Using BSG‐Doped Deep Trench of p‐Pillar

In this paper, we propose a superjunction trench gate MOSFET (SJ TGMOSFET) fabricated through a simple p pillar forming process using deep trench and boron silicate glass doping process technology to reduce the process complexity. Throughout the various boron doping experiments, as well as the process simulations, we optimize the process conditions related with the p pillar depth, lateral boron doping concentration, and diffusion temperature. Compared with a conventional TGMOSFET, the potential of the SJ TGMOSFET is more uniformly distributed and widely spread in the bulk region of the n drift layer due to the trenched p‐pillar. The measured breakdown voltage of the SJ TGMOSFET is at least 28% more than that of a conventional device.     

The Characteristics of Cu2O Thin Films Deposited Using RF‐Magnetron Sputtering Method with Nitrogen‐Ambient

We investigate the characteristics of Cu₂O thin films deposited through the addition of N₂ gas. The addition of N₂ gas has remarkable effects on the phase changes, resulting in improved electrical and optical properties. An intermediate phase (6CuO·Cu₂O) appears at a N₂ flow rate of 1 sccm, and a Cu₂O (200) phase is then preferentially grown at a higher feeding amount of N₂. The optical and electrical properties of Cu₂O thin films are improved with a sufficient N₂ flow rate of more than 15 sccm, as confirmed through various analyses. Under this condition, a high bandgap energy of 2.58 eV and a conductivity of 1.5×10^?2 S/cm are obtained. These high‐quality Cu₂O thin films are expected to be applied to Cu₂O‐based heterojunction solar cells and optical functional films.     

Current control method of thyristor converter for PF superconducting coil in KSTAR

This paper presents the current control method of thyristor converter which is applied to PF power supply in KSTAR [1]. The thyristor converter for PF superconducting coil is composed of two 6 pulse converters and each converter is connected in parallel using DC reactor to reduce voltage ripple, current rating of converter and harmonic components. For 4 quadrant operation, each 6 pulse converter has six arms of anti-paralleled thyristor device, back-to-back connection [2]. To apply this converter on KSTAR PF coil, stable coil current control is needed. Additionally, PF coil needs smooth current control without dead-time when current polarity changes and it is not easy in back-to-back thyristor converter. For this reason, zero crossing current control using circulating current and test results are introduced in this paper and it was satisfactory.     

Degradation behavior of Ni-YSZ anode-supported solid oxide fuel cell (SOFC) as a function of H2S concentration

This study investigated the effect of H₂S concentration (5, 10 and 50 ppm) on the degradation and performance of Ni-YSZ anode supported solid oxide fuel cells. When supplied with hydrogen fuel containing H₂S, the cell voltage dropped rapidly, and with increasing H₂S concentration, voltage drop % increased (due to higher sulfur coverage on the Ni surface) and saturated more rapidly. A high concentration (50 ppm) of H₂S led to an additional, slow rate voltage loss. In all cases, cell performance did not completely recover even after being supplied with H₂S-free hydrogen fuel, because of the incomplete desorption of sulfur from the Ni surface. After the performance tests, nickel sulfides were detected on the Ni surface by Raman spectra, which were produced by the reaction of the remaining adsorbed sulfur with Ni during the cooling process. This indicates that the formation of nickel sulfides was not responsible for the secondary voltage drop. SEM/EDS analyses combined with FIB revealed that the reason for the additional 2^nd drop was Ni oxidation; at a high sulfur coverage ratio (50 ppm), the outer layer of the Ni particle was oxidized by oxygen ions transported from the electrolyte. This indicates that H₂S concentration as well as current density is a critical factor for Ni oxidation, and gives rise to the second voltage drop (irreversible cell degradation). The present work showed that the degradation behavior and phenomenon can differ significantly depending on the concentration of H₂S, i.e., permanent changes may or may not occur on the anode (such as Ni oxidation) depending upon H₂S concentration.     

Experimental and Numerical Analysis of Injection Molding of Ti-6Al-4V Powders for High-Performance Titanium Parts

Both experimental and numerical analysis of powder injection molding (PIM) of Ti-6Al-4V alloy were performed to prepare a defect-free high-performance Ti-6Al-4V part with low carbon/oxygen contents. The prepared feedstock was characterized with specific experiments to identify its viscosity, pressure–volume–temperature and thermal properties to simulate its injection molding process. A finite-element-based numerical scheme was employed to simulate the thermomechanical process during the injection molding. In addition, the injection molding, debinding, sintering and hot isostatic pressing processes were performed in sequence to prepare the PIMed parts. With optimized processing conditions, the PIMed Ti-6Al-4V part exhibits excellent physical and mechanical properties, showing a final density of 99.8%, tensile strength of 973 MPa and elongation of 16%.